Home | About Journal  | Editorial Board  | Instruction | Subscription | Advertisement | Message Board  | Contact Us | 中文
MODERN TUNNELLING TECHNOLOGY 2013, Vol. 50 Issue (6) :72-79    DOI:
Current Issue | Next Issue | Archive | Adv Search << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
Discussion of an Analytical Method for Evaluating Tunnel Stability Based on the Elastic Modulus Degradation of Surrounding Rocks
(1 Institute of Water Resources and Hydro-Electric Engineering, Xi'an University of Technology, Xi'an 710048;
2 Grid Design Branch, Northwest Electric Power Design Institute, Xi'an 710075)
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract This paper quantitatively evaluates tunnel stability using a safety factor defined in light of rock deformation and discusses the degree of stability by increasing the actual rock displacement caused by tunnel excavation to the ultimate displacement at the critical state. Based on the theoretical elasto-plastic analysis of an unlined circular tunnel, it derives a principle parameter reduction method in which the increase of actual displacement is achieved by considering the elastic modulus degradation of the surrounding rock. The safetyfactor is calculated by using the ultimate displacement as the criterion of tunnel instability. With the finite-element parameter reduction method, the stability of unlined circular tunnels with different depths and diameters in various grades of rock is discussed. The results show that the parameter reduction method is feasible and applicable to rock masses of grades I to IV, whereas there are some deviations for the rock mass of grade V.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
Keywords     
Abstract: This paper quantitatively evaluates tunnel stability using a safety factor defined in light of rock deformation and discusses the degree of stability by increasing the actual rock displacement caused by tunnel excavation to the ultimate displacement at the critical state. Based on the theoretical elasto-plastic analysis of an unlined circular tunnel, it derives a principle parameter reduction method in which the increase of actual displacement is achieved by considering the elastic modulus degradation of the surrounding rock. The safetyfactor is calculated by using the ultimate displacement as the criterion of tunnel instability. With the finite-element parameter reduction method, the stability of unlined circular tunnels with different depths and diameters in various grades of rock is discussed. The results show that the parameter reduction method is feasible and applicable to rock masses of grades I to IV, whereas there are some deviations for the rock mass of grade V.
Keywords     
published: 2013-05-16
Cite this article:   
.Discussion of an Analytical Method for Evaluating Tunnel Stability Based on the Elastic Modulus Degradation of Surrounding Rocks[J]  MODERN TUNNELLING TECHNOLOGY, 2013,V50(6): 72-79
URL:  
http://www.xdsdjs.com/EN/      或     http://www.xdsdjs.com/EN/Y2013/V50/I6/72
 
No references of article
没有找到本文相关文献
Copyright 2010 by MODERN TUNNELLING TECHNOLOGY