基于反应位移法的盾构隧道横断面抗震计算

Download: PDF (0KB) HTML (1KB) Export: BibTeX or EndNote (RIS) Supporting Info

摘要目前我国盾构隧道结构的抗震设计多采用地震系数法。文章引入反应位移法计算地震荷载作用下的衬砌内力增量，对非地震荷载作用下的衬砌内力则考虑洞顶压力和孔隙水压力，将这两种内力叠加则得到隧道地震作用下的总内力，据此进行盾构隧道抗震设计；并与有限元法、地震系数法的计算结果进行了对比。结果表明，在进行盾构隧道抗震设计时，可以应用反应位移法进行衬砌的强度验算；在地震作用下，从竖轴开始隧道每隔30°将产生较大的正内力和负内力，在隧道横截面抗震设计中需要予以特别考虑。

	Service

	把本文推荐给朋友反应位移法盾构隧道衬砌内力抗震设计 ”几篇好文章，特向您推荐。请点击下面的网址：" name=neirong>
	加入我的书架
	加入引用管理器
	Email Alert
	RSS
	作者相关文章

关键词：反应位移法 ')" href="#">反应位移法盾构隧道 ')" href="#">盾构隧道衬砌内力 ')" href="#">衬砌内力抗震设计')" href="#">抗震设计

Abstract： At present, the seismic coefficient method is often adopted in the aseismic design of most shield tunnels in China. In this paper, the response displacement method is introduced to calculate the increments of internal force in a lining under seismic loading, while the internal force in a lining under normal conditions is calculated by taking into account the crown pressure and the pore water pressure. Then, by means of the superposition of the above two kind of forces, the total internal force in the lining under seismic loading is obtained, and the aseismic design of a shield tunnel is conducted based on all these factors. Compared with the calculation results of the finite element method and the seismic coefficient method, it shows that the response displacement method can be applied to the lining strength calculations for the aseismic design of shield tunnels and the major positive internal force and negative internal force would emerge every 30° starting from the vertical axis under seismic loading, which requires special consideration in the aseismic design of a tunnel cross section.

Keywords：

Response displacement method, Shield tunnel, Internal force of lining, Aseismic design

出版日期: 2013-04-27

基金资助:

广东省交通运输厅科技项目（NO.201002024）.

作者简介: 作者简介：蒋英礼（1984-），男，讲师，硕士研究生，从事隧道工程施工教学与管理方面的研究， E-mail: jiangyingl@163.com.

引用本文:

.基于反应位移法的盾构隧道横断面抗震计算[J] 现代隧道技术, 2013,V50(6): 52-57

.Aseismic Calculations for a Shield Tunnel Cross Section Based on the Response Displacement Method[J] MODERN TUNNELLING TECHNOLOGY, 2013,V50(6): 52-57

链接本文:

http://www.xdsdjs.com/CN/ 或 http://www.xdsdjs.com/CN/Y2013/V50/I6/52