Abstract：
In order to study the influence of spray-applied waterproofing membrane layer on the mechanical proper? ties of tunnel lining structure, a numerical calculation model of composite lining, spray-applied waterproofing lining and single-shell lining is established according to the mechanical parameters and interface parameters of waterproofing membrane measured by tests, and comparative analysis is made on the mechanical properties of the three types of lining structures. The research results show that: (1) compared with the composite lining, the stress of the secondary lining in the spray-applied waterproofing lining structure is significantly reduced, and the stress of the initial support has little change, but the displacement of both the initial support and the secondary lining increases;(2) in the spray-applied waterproofing lining structure, the whole section of the secondary lining is in the state of small eccentric compression, and the safety factor is greatly improved; (3) spray-applied waterproofing membrane layer can improve the cooperative force-bearing capacity of initial support and secondary lining, and improve the stress state of secondary lining, which is beneficial to improve the safety of secondary lining; and (4) with the increase of the cooperative force-bearing capacity of spray-applied waterproofing lining structure, the internal force of spray-applied waterproofing lining structure will be infinitely close to that of single-shell lining structure.
JIANG Yajun1 HE Bin1 ZHAO Jumei1 LIU Jitai1 WANG Huqun2,
3
.Study on Mechanical Properties of Tunnel Lining Structure with Spray-applied Waterproofing Membrane[J] MODERN TUNNELLING TECHNOLOGY, 2022,V59(1): 95-103
2022, Vol. 59 