[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2020, Vol. 57 Issue (3) :204-208    DOI:
材料与设备 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
油气管道隧道衬砌台车设计、制造与应用
(中油管道建设工程有限公司,廊坊 065001)
Design, Manufacture and Application of the Lining Formwork for Oil and Gas Pipeline Tunnels
(China Petroleum Pipeline Construction Engineering Co., Ltd., Langfang 065001)
Download: PDF (3273KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 采用传统隧道衬砌台车施作小断面油气管道隧道衬砌时,存在下部净空不足,阻碍施工机械通行,致使隧道只能进行单一工序施工,施工进度缓慢等问题。文章通过采用模板与门架全贴合技术、滑动支座技术、台车整体顶升技术、自动化控制技术等对传统衬砌台车进行小型化、自动化改造,以使台车净空最大化,为施工机械穿行台车下部创造条件,实现小断面油气管道隧道掘进、初期支护和二次衬砌作业同步施工及台车半自动化支模施工。通过工程实际应用表明:采用改造的油气管道隧道衬砌台车,可大幅提升油气管道隧道施工的安全、质量和效率,节约隧道整体工期,为后续管道安装赢得宝贵时间。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
刘 明 胡 谦 王志喜 缴鑫璐
关键词:   
Abstract: The problem of insufficient clearance at the lower part is encountered when the traditional lining trolley is applied to the oil and gas pipeline tunnel with small section, and it blocks construction machinery to go through,results in construction in single tunnel construction process and so slows construction progress.The renovations of miniaturization and automation are conducted by taking the techniques of full-fit of gantry and formwork, slip bearings, integral formwork lifting and automatic control in order to maximize the clearance and make it possible for the construction machinery to pass through and realize synchronous construction of tunnel excavation, primary support and secondary lining installation as well as semi-automatic control of formwork erection in the oil and gas pipeline tunnel. The case application shows that the renovated lining formwork for the oil and gas pipeline tunnel can greatly improve construction safety, quality and efficiency and shorten construction period.
KeywordsOil and gas pipeline tunnel,   Tunnel lining,   Lining formwork,   Design     
作者简介: 作者简介:刘 明(1986-),男,硕士研究生,工程师,主要从事隧道施工技术研究工作,E-mail:326079500@qq.com.
引用本文:   
刘 明 胡 谦 王志喜 缴鑫璐 .油气管道隧道衬砌台车设计、制造与应用[J]  现代隧道技术, 2020,V57(3): 204-208
LIU Ming HU Qian WANG Zhixi JIAO Xinlu .Design, Manufacture and Application of the Lining Formwork for Oil and Gas Pipeline Tunnels[J]  MODERN TUNNELLING TECHNOLOGY, 2020,V57(3): 204-208
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2020/V57/I3/204
 
没有本文参考文献
[1] 马 辉 1 高明忠 2.基于系统工程方法论的川藏铁路隧道工程建设管理探讨[J]. 现代隧道技术, 2020,57(3): 1-8
[2] 王明年 1,2 郭晓晗 1,2 于 丽 1,2 李春荟 1,2 陈树汪 3.高海拔特长铁路隧道紧急救援站位置选型研究[J]. 现代隧道技术, 2020,57(3): 9-14
[3] 李 畅 1,2,3 王 刚 1,2 仇文革 1,2,3 龚 伦 1,2 赵迎春 4 王秋会 4.限阻器在高水平地应力隧道支护中的研究与应用[J]. 现代隧道技术, 2020,57(3): 15-29
[4] 廖 军 1 董 谦 1 梁洪永 2 简 波 2 石豫川 1,3 龚洪苇 1.近水平红层公路隧道围岩分级指标初探[J]. 现代隧道技术, 2020,57(3): 25-29
[5] 卢 松 1,2 汪 旭 1,2 李苍松 1,2 孟 露 1,2.应用HSP法的TBM隧道施工地质预报技术研究[J]. 现代隧道技术, 2020,57(3): 30-35
[6] 钟祖良 1,2 高国富 1,2 陈 鹏 1 严 如 1.重庆两江船舶观光隧道设计方案探讨[J]. 现代隧道技术, 2020,57(3): 36-42
[7] 黄福杰 何则干 张为民 刘珊珊.BIM技术在沉管隧道工程设计中的应用研究[J]. 现代隧道技术, 2020,57(3): 43-48
[8] 唐晓松 1,2 郑颖人 3 王永甫 1.有限元强度折减法在隧道施工稳定分析与控制中的应用[J]. 现代隧道技术, 2020,57(3): 49-55
[9] 吴 波 1, 2 兰扬斌 1,2 杨仕升 1,2 杨建新 3 庞晓瑜 3.基于强度折减动力分析法的围岩稳定性研究[J]. 现代隧道技术, 2020,57(3): 56-64
[10] 周翠英 1, 2 李 昂 2,3 刘 镇 1,2.平行褶皱构造对隧道围岩变形的影响研究[J]. 现代隧道技术, 2020,57(3): 65-74
[11] 马 莉 1 刘亚朋 2 李 盛 3,4 吕文达 5 谢 超 3,4 代金鹏 3,4.不同减载措施下高填黄土拱形明洞结构受力研究[J]. 现代隧道技术, 2020,57(3): 75-84
[12] 张丙武 1 张 鹏 1 戴振华 2 吴银河 2 罗 卫 2.河底地铁盾构隧道管片受力特征分析[J]. 现代隧道技术, 2020,57(3): 85-90
[13] 隋 心 1 张正维 1 闵 绚 2 DOWNIE Steven 3 PADHANI Shahid3 赵丽博 4.超长GIL综合管廊SF6气体泄露模拟研究[J]. 现代隧道技术, 2020,57(3): 91-98
[14] 张珂峰.前伏溶洞巷道开挖突水数值模拟研究[J]. 现代隧道技术, 2020,57(3): 99-107
[15] 张 研 1, 2 王 伟 2 邓雪沁 2.基于相关向量机的TBM掘进速度预测模型[J]. 现代隧道技术, 2020,57(3): 108-114
Copyright 2010 by 现代隧道技术