[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2021, Vol. 58 Issue (6) :210-217    DOI:
施工技术 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
钻爆法施工隧道工装配套设计及工序标准化控制研究
(中铁城市发展投资集团有限公司,成都 610218)
Research on Machinery Matching Design and Process Standardization Control in Tunnelling by Drilling and Blasting Method
(China Railway City Development and Investment Group Co. Ltd., Chengdu 610218)
Download: PDF (1604KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要  为解决传统钻爆法施工隧道时存在机械化程度低、施工人员劳动强度大、施工进度缓慢等问题,文章以宜彝高速公路飞蛾山隧道为工程背景,从施工组织方案、机械化工装作业配套方法、工序施工标准化管理等方面进行分析,提出了一套适用于钻爆法施工隧道的工装配套技术及工序标准化控制方案。实际效果表明:相较于传统钻爆法施工,工装配套快速施工大幅度提升了施工进度,减少了生产成本,降低了施工人员的施工风险;实施工序标准化控制可明显缩短各工序所需时间。通过工装配套设计和工序标准化控制,飞蛾山隧道Ⅳ、Ⅴ级围岩段施工每循环在传统工艺的基础上可分别节约23.85 h和27.5 h,取得了较好的社会效益和经济效益,实现了飞蛾山隧道的快速安全施工。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
李武伦 蒋证全
关键词:   
Abstract: In order to solve the problems of low mechanization level, high labor intensity and slow construction progress in tunnelling by conventional drilling and blasting method, taking Feieshan tunnel on Yibin-Yiliang expressway as the engineering background, the detailed analysis is carried out from the aspects of construction organization scheme, mechanized equipment operation matching method, construction process standardization management, etc., and the machinery matching technology and process standardization control scheme are put forward,which are suitable for tunnelling by drilling and blasting method. The actual construction effects show that, compared with the conventional drilling and blasting method, using the machinery matching technology it can greatly improve the construction progress, reduce the production cost and lower the construction risk; and by implementing process standardization control it can significantly shorten the time required for each process. In the construction of Grade Ⅳ and Grade Ⅴ surrounding rock sections of Feieshan tunnel, by means of machinery matching design and process standardization control it can save 23.85 h and 27.5 h per cycle respectively compared with the traditional construction technology, achieving good social and economic benefits, and realizing the rapid and safe construction of Feieshan tunnel.
KeywordsHighway tunnel,   Drilling and blasting construction method,   Construction machinery matching,   Process standardization     
作者简介: 作者简介:李武伦(1966-),男,高级工程师,主要从事投融资地铁、公路建设项目技术管理、安全质量管理工作,E-mail:250847690@qq.com.
引用本文:   
李武伦 蒋证全 .钻爆法施工隧道工装配套设计及工序标准化控制研究[J]  现代隧道技术, 2021,V58(6): 210-217
LI Wulun JIANG Zhengquan .Research on Machinery Matching Design and Process Standardization Control in Tunnelling by Drilling and Blasting Method[J]  MODERN TUNNELLING TECHNOLOGY, 2021,V58(6): 210-217
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2021/V58/I6/210
 
没有本文参考文献
[1] 冯冀蒙 1,2 蒋 辉 1,2 丁晓琦 1,2 虞龙平 1,2 张俊儒 1,2.并行双洞隧道穿越滑坡工程研究进展与挑战[J]. 现代隧道技术, 2021,58(6): 1-10
[2] 卢冠楠 1 王 鹏 1 杨 蕴 2 毛成君 3 吴咏敬 4 吴剑锋 3 董 平 3, 4 吴吉春 3.岩溶区隧道排水系统地下水渗流结晶堵塞机理及阻垢技术研究综述[J]. 现代隧道技术, 2021,58(6): 11-20
[3] 董建松.厦门海沧海底隧道穿越风化槽施工技术[J]. 现代隧道技术, 2021,58(6): 197-203
[4] 付 雷 马 鑫 邵 炜.冷水混入模式对藏南隧道高温热害预测的影响[J]. 现代隧道技术, 2021,58(6): 21-30
[5] 花晓鸣 罗晨曦 苟晓军 张海超.结合Landsat 8遥感影像的长大深埋隧道地表地热空间分布特征分析——以高黎贡山隧道为例[J]. 现代隧道技术, 2021,58(6): 31-37
[6] 王明年 1,2 崔 鹏 1,2 于 丽 1,2 卢旭东 3 胡萧越 1,2 夏鹏曦 1,2.基于台阶试验的相对最大摄氧量与人员疏散能力关系研究[J]. 现代隧道技术, 2021,58(6): 38-45
[7] 周晓军 1 郭 建 1 杨昌宇 2 卿伟宸 2 熊国兴 2 旷文涛 2 潘英东 1.钻爆法双线铁路隧道预制拼装二次衬砌分块方式研究[J]. 现代隧道技术, 2021,58(6): 46-58
[8] 何乐平 1 徐应东 1 胡启军 1 蔡其杰 2.基于博弈论-云模型的软岩隧道大变形风险评估[J]. 现代隧道技术, 2021,58(6): 85-94
[9] 郝俊锁.复杂地质特长深埋水工隧洞智能化施工关键技术研究[J]. 现代隧道技术, 2021,58(6): 188-196
[10] 魏 纲 1 郝 威 2 魏新江 1 王 霄 2 章书远 2.竖向顶管施工全过程数值模拟研究[J]. 现代隧道技术, 2021,58(6): 59-67
[11] 肖尊群 1,2,3 曹童童 1 许彩云 1 杨 凯 2 董琼英 1 姜亦男 1 耿星月 1 舒志鹏 1.基于叠加原理的大尺寸矩形截面竖向曲线顶管顶进力数值估算方法[J]. 现代隧道技术, 2021,58(6): 68-76
[12] 徐公允 1 徐汪豪 1,2 姚志刚 1 方 勇 1 刘四进 3.基于三维RBD-DEM耦合方法的贯入角度对滚刀冲击影响分析[J]. 现代隧道技术, 2021,58(6): 77-84
[13] 来弘鹏 1 王 斌 1 刘禹阳 2.考虑地层开裂的浅埋黄土隧道围岩压力计算方法[J]. 现代隧道技术, 2021,58(6): 95-101
[14] 张冬梅 1,2 陈淙岑 2.管片钢筋和螺栓锈蚀条件下盾构隧道结构时变可靠度分析[J]. 现代隧道技术, 2021,58(6): 111-120
[15] 黄迪文 霍宏斌 陈 东.基于优化神经网络的圆形隧道受剪变形分析[J]. 现代隧道技术, 2021,58(6): 102-110
Copyright 2010 by 现代隧道技术