[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2023, Vol. 60 Issue (3) :266-273    DOI:
规划与设计 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
小断面隧洞悬臂掘进机施工方案比选研究
(1.中铁开发投资集团有限公司,昆明 650000;2.中铁工程装备集团隧道设备制造有限公司,新乡 453000)
Comparison and Selection of Construction Schemes for the Boom-type Roadheader in Small-section Tunnels
(1. China Railway Development and Investment Group Co., Ltd., Kunming 650000; 2. China Railway Engineering Equipment Group Tunnel Equipment Manufacturing Co., Ltd., Xinxiang 453000)
Download: PDF (4398KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 为了解决小断面隧洞在实际施工中受断面尺寸影响内部作业空间有限造成的工序交叉多、相互干扰大、同一个工作面上钻孔和出渣等工作只能周期性循环进行、无法在施工中运用高效的大型机械设备等问题,以滇中引水工程红河段龙树山小断面隧洞为依托,首先提出3种机械化施工配套方案,对各方案所采用施工机械、施工方法、进度等方面进行对比分析,最终确定了中铁装备研发的CTR300S小断面隧洞水利型悬臂掘进机结合人工支护的施工配套方案。针对理论分析后所选择的施工配套方案开展技术应用试验研究,结果表明:(1)Ⅳ~Ⅴ级围岩稳定性差,以板岩、粉细砂岩、灰岩岩性为主,地下水较丰富的试验工况下,CTR300S悬臂掘进机工作效率可达20~40 m3/h,月开挖进尺预估可超过150 m,达到了预期进度效果;(2)小断面隧道全断面开挖,在悬臂掘进机截割部处为立拱、喷浆等工序提供作业平台是可行的。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
刘万林 1 尚明明 2 王全胜 2 王冬洪 2 温时雨 1
关键词滇中引水   小断面隧洞   悬臂掘进机   机械开挖   试验研究     
Abstract: In order to solve the problems caused by the limited operation space inside the small-section tunnel due to the influence of section size in actual construction, such as multiple process intersections, large mutual interference,periodic cycling of drilling and mucking on the same working face, and the inability to use efficient large-scale mechanical equipment in construction, this paper first puts forward three mechanized construction schemes based on the Longshushan Small-section Tunnel Project in Honghe section of the water diversion project in Central Yunnan,compares and analyzes the construction machinery, construction methods, construction progress and other aspects used in each scheme, and determines the final construction supporting scheme, in which the CTR300S boom-type roadheader, developed by China Railway Engineering Equipment Group Co., Ltd. specially for small-section hydraulic tunnels, is used combined with manual supporting operation. A technical application experimental study was conducted on the selected construction supporting plan after theoretical analysis. The results showed that: (1) the stability of Grade Ⅳ~Ⅴ surrounding rocks is poor, mainly composed of slate, fine sandstone and limestone lithology. Under rich groundwater test cases, the working efficiency of CTR300S boom-type roadheader can reach 20~40 m3/h, and the estimated monthly excavation advance rate can exceed 150 m, achieving the expected progress effect; (2)it is feasible to provide a working platform for installation of arches, shotcrete and other processes at the cutting part of the roadheader for full-section excavation of small-section tunnels.
KeywordsWater diversion project in Central Yunnan,   Small section,   Boom-type roadheader,   Mechanical excava? tion,   Experimental study     
基金资助:中国中铁科技研究开发计划课题(2020-重大专项-04)
作者简介: 刘万林(1985-),男,高级工程师,主要从事隧道工程方面的研究及管理工作,E-mail: yydzxwlqx@163.com. 通讯作者:尚明明(1985-),男,工程师,主要从事隧道及地下工程施工管理方面的工作,E-mail: 546590312@qq.com.
引用本文:   
刘万林 1 尚明明 2 王全胜 2 王冬洪 2 温时雨 1 .小断面隧洞悬臂掘进机施工方案比选研究[J]  现代隧道技术, 2023,V60(3): 266-273
LIU Wanlin1 SHANG Mingming2 WANG Quansheng2 WANG Donghong2 WEN Shiyu1 .Comparison and Selection of Construction Schemes for the Boom-type Roadheader in Small-section Tunnels[J]  MODERN TUNNELLING TECHNOLOGY, 2023,V60(3): 266-273
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2023/V60/I3/266
 
没有本文参考文献
[1] 汪元冶1 丁文其1,2 杨进京3 乔亚飞1,2 丁文云3.岩溶地层大断面铁路隧道悬臂掘进机施工穿越上部既有建筑扰动规律研究[J]. 现代隧道技术, 2024,61(5): 274-284
[2] 杨赵峰1 汪 波2 杜永全1 黄长宽1 樊 勇1.主动支护技术在海东隧洞软岩大变形中的应用[J]. 现代隧道技术, 2024,61(3): 245-252
[3] 李 伟 1 蒋雅君 2 刘世军 2 王萃娟 3 肖华荣 4 崔恒涛 2.隧道混凝土基面岩溶水碳酸钙结晶生长机理研究[J]. 现代隧道技术, 2023,60(4): 246-253
[4] 蒋雅君 1 喻良敏 1 王萃娟 2 王永超 2 王虎群 3.基于纸纤维改性的隧道工程透水砂浆性能研究[J]. 现代隧道技术, 2022,59(2): 141-149
[5] 袁 伟 1 路军富 2 刘金松 1 吴俊猛 1.复杂地应力红层泥岩隧道持续底鼓原因分析[J]. 现代隧道技术, 2022,59(2): 242-250
[6] 谌桂舟 1,2 陈 政 1,2 琚国全 3 汪辉武 3 郭 春 1,2.高海拔隧道施工劳动强度与供氧浓度关系研究[J]. 现代隧道技术, 2022,59(1): 118-123
[7] 王伟强 罗勇欢 孔令俊 张银喜 陈彦北.GINA止水带力学性能数值模拟与试验研究[J]. 现代隧道技术, 2021,58(5): 237-243
[8] 黄基富 肖功夷.悬臂掘进机在交通隧道施工中的实践应用与适应性研究[J]. 现代隧道技术, 2021,58(2): 51-62
[9] 胡健中 1 王 勇 2 徐国平 2 许 昱 2 庾光忠 3 龚 毅 2.沉管隧道国产化GINA止水带试验研究及选型设计[J]. 现代隧道技术, 2020,57(4): 171-177
[10] 甄作林 1,2 朱江鸿 1 于 贵 3 盖玉玺 1 张虎元 1,4.兰州地下轨道交通围岩热物理参数试验研究[J]. 现代隧道技术, 2020,57(2): 163-168
[11] 林 宏 1 万茂森 2.悬臂掘进机成套机械化作业线在铁路隧道施工中的应用[J]. 现代隧道技术, 2019,56(2): 188-193
[12] 漆泰岳, 李斌.悬臂掘进机在复杂断面地铁隧道中的应用研究[J]. 现代隧道技术, 2011,48(4): 32-38
Copyright 2010 by 现代隧道技术