Home | About Journal  | Editorial Board  | Instruction | Subscription | Advertisement | Message Board  | Contact Us | 中文
MODERN TUNNELLING TECHNOLOGY 2011, Vol. 48 Issue (5) :129-133    DOI:
Current Issue | Next Issue | Archive | Adv Search << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
Construction Technique for the Intersection of the Inclined Shaft and Main Tunnel of the Shilin Tunnel
(Shaanxi Railway Engineering Vocational Technical Institute, Weinan  714000)
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract  A reasonable construction scheme is the foundation of safe and smooth construction during the construction of an intersection of an inclined shaft and the main tunnel. Different methods for intersecting the inclined shaft and main tunnel are addressed with respect to surrounding rock of various classes. For surrounding rock of classes II and III, a full-face excavation should be implemented to enter directly into the main tunnel. For surrounding rock of classes IV and V, the pilot tunnel method should be used with a circular curve to construct the main tunnel after reaching the boundary of the inclined shaft and main tunnel.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
LI Xiao-Bin
Keywords： Tunnel   Inclined shaft   Intersection   Construction technology     
Abstract：  A reasonable construction scheme is the foundation of safe and smooth construction during the construction of an intersection of an inclined shaft and the main tunnel. Different methods for intersecting the inclined shaft and main tunnel are addressed with respect to surrounding rock of various classes. For surrounding rock of classes II and III, a full-face excavation should be implemented to enter directly into the main tunnel. For surrounding rock of classes IV and V, the pilot tunnel method should be used with a circular curve to construct the main tunnel after reaching the boundary of the inclined shaft and main tunnel.
Keywords： Tunnel,   Inclined shaft,   Intersection,   Construction technology     
published: 2011-07-21
Cite this article:   
LI Xiao-Bin .Construction Technique for the Intersection of the Inclined Shaft and Main Tunnel of the Shilin Tunnel[J]  MODERN TUNNELLING TECHNOLOGY, 2011,V48(5): 129-133
URL:  
http://www.xdsdjs.com/EN/      或     http://www.xdsdjs.com/EN/Y2011/V48/I5/129
　
No references of article
[1] ZI Xiaoyu1 SHEN Yusheng1 ZHU Shuangyan1 LUO Ningning2 YANG Jiaqi1 CAO Bangjun1.Study on the Deformation Failure Laws and Support Measures for Tunnels in Layered Phyllite[J]. MODERN TUNNELLING TECHNOLOGY, 2021,58(3): 196-204
[2] LIU Yi1 ZHANG Yong1 PENG Zhen1 CHEN Jiawei2 LI Yuanhai.Vertical Roof Ripping Construction Techniques for Excavation of Main Tunnel from Inclined Shaft: A Case Study of the Large-span Metro Tunnel in Soft Surrounding Rock[J]. MODERN TUNNELLING TECHNOLOGY, 2020,57(4): 201-207
[3] YAN Zihai1,2 ZHANG Lifeng1,2 LU Junfu3 ZOU Jinjie1,2.Study on Construction Method of the Intersection of the Urban Underground Interchange Tunnel[J]. MODERN TUNNELLING TECHNOLOGY, 2019,56(1): 176-184
[4] WANG Bo-1, GUO Xin-Xin-1, HE Chuan-1, WU De-Xing-2.[J]. MODERN TUNNELLING TECHNOLOGY, 2018,55(5): 1-10
[5] Shu Heng, Wu Shuyuan, Li Jian, Guo Xiaohong.Health Monitoring Design for Extra-Large Diameter Underwater Shield Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 32-40
[6] Tuo Yongfei, Guo Xiaohong.General Design and Key Technologies of the Nanjing Weisan Road River-Crossing Tunnel Project[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 1-6
[7] Lin Xin1, Shu Heng1, Zhang Yaguo2, Yang Linsong1, Li Jin1, Guo Xiaohong1.Study of the Longitudial Profile Optimization of Large-Diameter Shield Tunnels in Mixed Ground with Very High Water Pressure[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 7-14
[8] Yao Zhanhu1, Yang Zhao2, Tian Yi1, Hu Huitao1.Key Construction Technology for the Nanjing Weisan Road River-Crossing Tunnel Project[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 15-23
[9] Liu Guangfeng1, Chen Fangwei2, Zhou Zhi1, Zhang Shilong3, Liu Mingqiang1.Identification of Investment Risks for River-Crossing Tunnels Based on Grey Fuzzy Multi-Attribute Group Decision Making[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 41-48
[10] Yao Zhanhu.Construction Risk Assessment for the Shield-Driven Section of the Nanjing Weisan Road River-Crossing Project[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 49-54
[11] Zhang Boyang1, Zhao Xiaopeng1, Zhang Yaguo2, Chen Yu1.Risk Control for Saturated Hyperbaric Intervention in Slurry Shield Tunnelling[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 55-61
[12] Li Xinyu, Zhang Dingli, Fang Qian, Song Haoran.On Water Burst Patterns in Underwater Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(4): 24-31
[13] Zhang Han1,2, Li Yingming1,3, Ren Fangtao2, Yang Mingdong3.Elasto-Plastic Analysis of the Surrounding Rock of a Tunnel/Roadway Based on the Zienkiewicz-Pande Criterion[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(2): 30-35
[14] Zhou Zelin, Chen Shougen, Li Yansong.Study of the Mechanical Characteristics of the Support Structure of a Deeply Buried Diversion Tunnel in Soft Rock[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(2): 36-43
[15] Liu Qiang1, Tan Zhongsheng1, Chen Libao2, Zou Xiaoxin1.Field Tests Regaring the Uncertainty of the Calculation Model for Soil Filling Pressure on Open-Cut Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2015,52(2): 128-134
Copyright 2010 by MODERN TUNNELLING TECHNOLOGY