Home | About Journal  | Editorial Board  | Instruction | Subscription | Advertisement | Message Board  | Contact Us | 中文
MODERN TUNNELLING TECHNOLOGY 2022, Vol. 59 Issue (5) :91-98    DOI:
Current Issue | Next Issue | Archive | Adv Search << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
Influence of Catchment Caused by Local Overbreak on the Mechanical Characteristics of Tunnel Support Structure
(1.Hunan University of Science and Technology, Xiangtan 411201; 2. China State Construction Railway Investment & Engineering Group Co., Ltd., Beijing 102628)
Download: PDF (5508KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract The catchment caused by local overbreak of the tunnel increases the bearing burden of the supporting structure, and it is easy to cause groundwater leakage and cracking of support structure, thus influencing the construction safety. Based on it, in order to study the influence of catchment pressure on the deformation characteristics, stress characteristics, internal force changes and safety of tunnel support, the numerical model is established based on the tunnel excavation in the water-bearing section. The initial support of the tunnel is subjected to circumferential pressure to simulate the external water pressure. Five external water pressure conditions are set for comparative study, and the stress and displacement results of tunnel support at different positions in the same section are analyzed respectively. The results show that after the catchement of overbreak area occurs, the tunnel support structure will be displaced in the direction of the external water pressure due to the external water pressure distributed along the tunnel contour, and the main influence range is in the catchment area of the tunnel. Stress concentration occurs in the catchment area when catchment caused by overbreak occurs on the crown and shoulder of the tunnel.When the side wall is overbreakd, the maximum principal stress decreases and the minimum principal stress increases gradually. The external water pressure only affects the internal force of the catchment area. The increase of the external water pressure will increase the axial force and decrease the bending moment. In addition, when the catchment occurs at the crown, the crown bending moment gradually changes from negative bending moment to positive bending moment. The research results can provide technical reference for the deformation control of tunnel surrounding rock in water-bearing region and the reinforcement measures of supporting structure.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
AN Yonglin1 GUO Jindong1 ZHOU Jin1 HU Wei1 DONG Chenyang2 XIANG Hui2 DAI Ling2
KeywordsCatchment caused by overbreak   External hydraulic pressure   Supporting structure   The mechanical characteristics     
Abstract: The catchment caused by local overbreak of the tunnel increases the bearing burden of the supporting structure, and it is easy to cause groundwater leakage and cracking of support structure, thus influencing the construction safety. Based on it, in order to study the influence of catchment pressure on the deformation characteristics, stress characteristics, internal force changes and safety of tunnel support, the numerical model is established based on the tunnel excavation in the water-bearing section. The initial support of the tunnel is subjected to circumferential pressure to simulate the external water pressure. Five external water pressure conditions are set for comparative study, and the stress and displacement results of tunnel support at different positions in the same section are analyzed respectively. The results show that after the catchement of overbreak area occurs, the tunnel support structure will be displaced in the direction of the external water pressure due to the external water pressure distributed along the tunnel contour, and the main influence range is in the catchment area of the tunnel. Stress concentration occurs in the catchment area when catchment caused by overbreak occurs on the crown and shoulder of the tunnel.When the side wall is overbreakd, the maximum principal stress decreases and the minimum principal stress increases gradually. The external water pressure only affects the internal force of the catchment area. The increase of the external water pressure will increase the axial force and decrease the bending moment. In addition, when the catchment occurs at the crown, the crown bending moment gradually changes from negative bending moment to positive bending moment. The research results can provide technical reference for the deformation control of tunnel surrounding rock in water-bearing region and the reinforcement measures of supporting structure.
KeywordsCatchment caused by overbreak,   External hydraulic pressure,   Supporting structure,   The mechanical characteristics     
Cite this article:   
AN Yonglin1 GUO Jindong1 ZHOU Jin1 HU Wei1 DONG Chenyang2 XIANG Hui2 DAI Ling2 .Influence of Catchment Caused by Local Overbreak on the Mechanical Characteristics of Tunnel Support Structure[J]  MODERN TUNNELLING TECHNOLOGY, 2022,V59(5): 91-98
URL:  
http://www.xdsdjs.com/EN/      或     http://www.xdsdjs.com/EN/Y2022/V59/I5/91
 
No references of article
[1] ZHAO Sensen ZHANG Dongmei HUANG Zhongkai.Mechanical Characteristics of Distributed Mortise-and-Tenon of Largediameter Shield Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2022,59(5): 54-62
[2] HAN Chao1 GAO Yimin2 ZHOU Guangjie1 ZHANG Lei1 LIU Xian2.Study on Mechanical Characteristics of Super Large Section Riser Pipe by Vertical Jacking Method[J]. MODERN TUNNELLING TECHNOLOGY, 2022,59(5): 125-135
[3] HUANG Shiguang1 YANG Yanna2 FAN Quanzhong2 HUANG Jingyu2 YU Lei2.Experimental Study on the Changing Pattern of Design Parameters of Controlled Drainage in Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2022,59(3): 201-210
[4] YANG Juan1,2,3 YANG Qixin2,3 QIU Pinming2,3.Experimental Study on the Bonding Performances of Spray-applied Waterproofing Membrane in Tunnels with CSL Structure[J]. MODERN TUNNELLING TECHNOLOGY, 2022,59(1): 104-110
[5] PAN Weiqiang1 JIAO Bochang2 LIU Xian2 ZENG Hua3 JI Maojie3.Field Test Research on the Contact Pressure and Stress Characteristics of Jacked Steel Pipes with Deep-buried Depth and Large-section[J]. MODERN TUNNELLING TECHNOLOGY, 2021,58(5): 104-113
[6] MA Li1 WANG Qicai1 LI Sheng1 LIU Yapeng2 NING Guixia1 HAN Guoqiang1.Analysis of Mechanical Properties and Influencing Factors of High-filled Cut-and-Cover Tunnel in Trench[J]. MODERN TUNNELLING TECHNOLOGY, 2020,57(6): 133-141
[7] MA Li1 LIU Yapeng2 LI Sheng3,4 LV Wenda5 XIE Chao3,4 DAI Jinpeng3,4.Study on the Mechanical Behaviors of High-filled Loess Arched Open Cut Tunnel under Different Load Reduction Measures[J]. MODERN TUNNELLING TECHNOLOGY, 2020,57(3): 75-84
[8] TAO Weiming1 LI Huayun2 ZHANG Zhiqiang2 GUO Yongfa3.Study on the Shear Strength of Surrounding Rocks and Mechanical Behaviors of Supporting Structure of the Shallow-buried Tunnel in Swelling Soil[J]. MODERN TUNNELLING TECHNOLOGY, 2020,57(1): 36-43
[9] ZHAO Licai1,2 YU Jianxing1.Design Optimization for the Rapid Excavation of Inclined Shaft of the Long Tunnel and Construction Period Estimation[J]. MODERN TUNNELLING TECHNOLOGY, 2019,56(5): 50-57
[10] WANG Keyi1 XU Dongqiang2 SUN Xiaoshan2.Study of the Invert Installation Issues for a Three-Lane Road Tunnel in Surrounding Rock of Grade Ⅲ1[J]. MODERN TUNNELLING TECHNOLOGY, 2018,55(2): 103-109
[11] CHEN Yixin1 CUI Genqun2 SONG Lin3.Back Analysis of the Internal Force on the Supporting Structure of a Multi-Centered Circular Arch Tunnel[J]. MODERN TUNNELLING TECHNOLOGY, 2018,55(1): 85-91
[12] WU Jin-Gang-1, SONG Yan-Bin-1, CHEN Ren-Dong-1, CHEN Dao-Song-2.Design Optimization of the Support Reinforcement at the Portal Section of a Highway Tunnel[J]. MODERN TUNNELLING TECHNOLOGY, 2014,51(6): 12-18
[13] LIU Ji-Guo-1, CHENG Yong-1, GUO Xiao-Hong-1, Wang-Wen-Zhou-2.Design for a Super-Shallow Large-Section Double-Level Tunnel in Complex Conditions Underneath Sensitive Buildings[J]. MODERN TUNNELLING TECHNOLOGY, 2014,51(5): 174-179
[14] LI Hua-Yun-1, Zhang-Zhi-Qiang-1, Zhang, YANG 1, Chen-Li-Ming-1, Yang, XIANG 2, Zhang-Xiao-Wei-2.A Study of the Basic Issues Regarding the Swelling Pressure Analytical Solution for Mountain Tunnels[J]. MODERN TUNNELLING TECHNOLOGY, 2014,51(1): 54-61
[15] .Numerical Analysis of the Scheme for the Portal Excavation of a Shallow Tunnel in a Grade IV Rock Mass[J]. MODERN TUNNELLING TECHNOLOGY, 2013,50(1): 67-72
Copyright 2010 by MODERN TUNNELLING TECHNOLOGY