Home | About Journal  | Editorial Board  | Instruction | Subscription | Advertisement | Message Board  | Contact Us | 中文
MODERN TUNNELLING TECHNOLOGY 2014, Vol. 51 Issue (4) :133-140    DOI:
Article Current Issue | Next Issue | Archive | Adv Search << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
Development of theφ800 mm EPB Shield Model Testing System
(Key Laboratory of Tunnel Engineering, Ministry of Education, Southwest Jiaotong University)
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
Abstract  The self-developed φ800 mm EPB shield model system is composed of a φ800 mm EPB shield, the driving control system, the segment lining structure, and other accessories. This paper presents the detailed description of structure type, layout feature, parameter determination and specific function etc respectively for 5 important components of the shield shell, cutting system, screw conveyor, thrusting system and control panel. By use of the model system, the excavation test in the original soil and similar model test can be carried out according to different requirements, even for approaching construction case under complex conditions. Therefore, for validation of the reliability of model system, the excavation test in original sand stratum is carried out to obtain the ground surface settlement pattern and the development process as well as the relationship between the ground loss ratio and the ground displacement; meanwhile, the ground surface settlement is calculated by Peck formula and compared with the test values, verifying the reliability of this EPB shield model system.
Service
Email this article
Add to my bookshelf
Add to citation manager
Email Alert
RSS
Articles by authors
HU Xiong-Yu
HE Chuan
FANG Yong
DAI Guang-Hui
JIANG Ying-Chao
KeywordsEPB shield tunnel   Model test   Shield testing system   Design paramenters   Ground surface settlement   Ground loss     
Abstract: The self-developed φ800 mm EPB shield model system is composed of a φ800 mm EPB shield, the driving control system, the segment lining structure, and other accessories. This paper presents the detailed description of structure type, layout feature, parameter determination and specific function etc respectively for 5 important components of the shield shell, cutting system, screw conveyor, thrusting system and control panel. By use of the model system, the excavation test in the original soil and similar model test can be carried out according to different requirements, even for approaching construction case under complex conditions. Therefore, for validation of the reliability of model system, the excavation test in original sand stratum is carried out to obtain the ground surface settlement pattern and the development process as well as the relationship between the ground loss ratio and the ground displacement; meanwhile, the ground surface settlement is calculated by Peck formula and compared with the test values, verifying the reliability of this EPB shield model system.
KeywordsEPB shield tunnel,   Model test,   Shield testing system,   Design paramenters,   Ground surface settlement,   Ground loss     
published: 2014-01-10
Cite this article:   
HU Xiong-Yu, HE Chuan, FANG Yong etc .Development of theφ800 mm EPB Shield Model Testing System[J]  MODERN TUNNELLING TECHNOLOGY, 2014,V51(4): 133-140
URL:  
http://www.xdsdjs.com/EN/      或     http://www.xdsdjs.com/EN/Y2014/V51/I4/133
 
No references of article
[1] GUO Yongjun1 LI Chao2 ZHENG Jianguo3 YU Yongtang4 ZHU Caihui5.Influence of Ground Surcharge on Existing Shield Tunnel Segments in Xi′an Loess Strata[J]. MODERN TUNNELLING TECHNOLOGY, 2025,62(4): 61-72
[2] WANG JingYong1,2 WANG Ping2 YANG Jin2 JI Feng3.Optimization Study on the Support Structure of a Tunnel in Carbonaceous Phyllite Using Physical Model Tests[J]. MODERN TUNNELLING TECHNOLOGY, 2025,62(3): 160-169
[3] GUO Ying PENG Wenqing CHEN Shiqiang ZHANG Qiong WANG Jiawei.Calculation Method and Validation of Equivalent Length for Traffic Tunnel Ventilation Model Test[J]. MODERN TUNNELLING TECHNOLOGY, 2025,62(2): 230-240
[4] TAO Weiming1,2 ZHU Xingyu1,3 ZHANG Zhiqiang1,3 YU Hang1,3 FAN Lei2.Experimental Study on the Catastrophic Evolution of Water and Mud Inrush in Tunnels with Karst Conduits[J]. MODERN TUNNELLING TECHNOLOGY, 2025,62(1): 221-230
[5] ZHANG Xinyang1, 2 SHEN Yusheng1, 2 CHANG Mingyu1, 2 WANG Haokang1, 2 PAN Xiaohai1, 2 WANG Yanyan1, 2.Mix Proportion Design of Similar Materials for Tunnel Surrounding Rocks Based on GA-BP Neural Network[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(6): 82-91
[6] KUANG Liang1 SU Wei1 TAO Weiming1 TIAN Siming2 SHEN Yusheng3 LI Xu2 WANG Huiwu1.Study on the Impact Zoning and Fortification Range of Tunnel Structures Crossing Strike-slip Faults[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(6): 45-54
[7] YANG Wendong1 WU Yang1 WANG Zhide1 WU Haigang1,2 LI Gen1.Experimental Study on the Influence Zoning on Existing Pile Foundations Induced by Tunnelling[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(6): 200-208
[8] YANG Chunshan1 XU Shiyang2 WEI Lixin1 CHEN Junsheng3.Experimental Study on the Mechanical Characteristics of Shield Tunnels under Vertical Jacking[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(5): 210-218
[9] PAN Xiaohai1 SHEN Yusheng1 WANG Haokang1 WANG Yanyan1 ZHANG Xinyang1 ZHANG Xi1 ZUO Leibin2.Study on Response Characteristics of the Tunnel Structure under Dislocation of Strike-slip Faults with Multiple Fracture Surfaces[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(4): 210-220
[10] CHEN Zeen1,2 CHEN Xiaofeng1,2,3 KONG Xiangmiao4 ZHANG Xin5 ZHANG Yongqiang2.Study on the Flow Characteristics and Local Loss Characteristics of the Confluence Segment of Bifurcate Tunnel[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(3): 53-60
[11] LIU Hongzhi1 XU Shankun1 GUO Yidong2,3 FANG Yingran2,3 LI Xinggao2,3.Analysis of the Effect of Slurry Rheological Model on the Pressure Loss Characteristics of Slurry Discharge Pipe of Slurry Shield[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(1): 182-189
[12] ZENG Yi1 GAO Yue2,3 WU Peilin2,3 ZHANG Xiaolong1 FU Yanbin2,3.Study on Model Test of Existing Shield Tunnel Uplift[J]. MODERN TUNNELLING TECHNOLOGY, 2024,61(1): 200-207
[13] MA Yalina1,2 CHEN Yaqi1,2 LIU Jiguo1,2 CUI Zhen3 ZHOU Guangxin4.Research on Failure Mechanism of Tunnel with Articulated Lining Crossing Strike-slip Fault[J]. MODERN TUNNELLING TECHNOLOGY, 2023,60(5): 136-147
[14] ZHENG Kunlong1,2 WANG Jianyun2 LINGHU Yan1 YANG Xiaohua3 DING Yate1 CHEN Kun1 WANG Zhifeng3.Experimental Study on Prevention and Treatment of Tunnel Leakage with Rapid Setting Permeable Crystallographic Grouts[J]. MODERN TUNNELLING TECHNOLOGY, 2023,60(4): 254-263
[15] ZHU Caihui1,2 YING Li2 YANG Qiqiang2 LI Yubo3.A Study on Reduction Coefficient of External Hydraulic Pressure at the Lining of Diversion Tunnel in Saturated Q2 Loess Stratum[J]. MODERN TUNNELLING TECHNOLOGY, 2023,60(2): 94-102
Copyright 2010 by MODERN TUNNELLING TECHNOLOGY