[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2019, Vol. 56 Issue (5) :157-162    DOI:
施工技术 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
大跨度小净距公路隧道设计与施工方法研究
(北京市市政工程设计研究总院有限公司,北京 100082)
Study on the Design and Construction Method for the Large-span Highway Tunnel with Small Interval
(Beijing General Municipal Engineering Design & Research Institute Co., Ltd., Beijing 100082)
Download: PDF (4599KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 为了更好地确定小净距隧道的设计参数及相应的施工方法,文章以兴延高速公路白羊沟隧道北口小净距段施工为研究背景,利用有限元软件模拟分析了采用台阶法、CD法及CRD法开挖Ⅳ级围岩小净距段的施工过程,获得了不同施工方法下围岩和支护结构的变形及力学特性。实际监测结果表明,该隧道Ⅳ级围岩小净距段施工采用台阶法是合理的,中夹岩柱加固措施采用预应力长锚杆及超前小导管注浆组合加固对小净距段安全、顺利施工行之有效。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
李建林 吴金刚 毕 强
关键词:   
Abstract: In order to determine the design parameters and corresponding construction method of the small-inter? val tunnel, the deformation and mechanical behaviors were obtained by a simulation analysis of construction of the small-interval section excavated by bench method, CD method and CRD method in the surrounding rock of grade Ⅳ by FEM software based on the construction of the small-interval section at north side of the Baiyanggou tunnel on the Xingyan expressway. The monitoring results show that it is reasonable for this section of small-interval tunnel to be constructed by bench method in the surrounding rock of grade Ⅳ and it is effective for the safe and smooth construction of the small-interval section by reinforcement of the rock pillar between the two tunnel tubes with a combination of pre-stressed long anchor bolts and advance ductule injection.
KeywordsLarge-span highway tunnel,   Small-interval tunnel,   Construction method,   Numerical simulation,   Moni? toring and measurement     
作者简介: 作者简介:李建林(1989-),男,工程师,主要从事隧道及地下工程方面的设计和研究工作,E-mail:lijianlin89@bmedi.cn.
引用本文:   
李建林 吴金刚 毕 强 .大跨度小净距公路隧道设计与施工方法研究[J]  现代隧道技术, 2019,V56(5): 157-162
LI Jianlin WU Jingang BI Qiang .Study on the Design and Construction Method for the Large-span Highway Tunnel with Small Interval[J]  MODERN TUNNELLING TECHNOLOGY, 2019,V56(5): 157-162
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2019/V56/I5/157
 
没有本文参考文献
[1] 范 磊.高地温深埋特长隧道热害综合防治关键技术研究[J]. 现代隧道技术, 2019,56(6): 1-10
[2] 高菊茹 1 张 博 1 王 耀 1 渠浩波 1 姚志军 2.高海拔特长公路隧道施工作业环境改善关键技术研究[J]. 现代隧道技术, 2019,56(6): 11-18
[3] 柳 献 1 李海涛 1 管攀峰 2 杨志豪 2.快速接头盾构隧道衬砌结构设计参数研究[J]. 现代隧道技术, 2019,56(6): 19-26
[4] 李 强 1 甘鹏路 2,3 钟小春 4.盾构隧道管片壁后注浆厚度对隧道抗浮影响研究[J]. 现代隧道技术, 2019,56(6): 27-35
[5] 李荣欣 1 陈骅伟 2 周松元 1 刘新平 1.含油气隧道瓦斯成因分析与安全治理[J]. 现代隧道技术, 2019,56(6): 36-40
[6] 唐 斌.成都地铁龙泉山隧道浅层天然气分布特征及运移规律研究[J]. 现代隧道技术, 2019,56(6): 41-46
[7] 秦 良 1 张庆朝 2.瞬变电磁法隧道超前地质预报物理模拟[J]. 现代隧道技术, 2019,56(6): 47-51
[8] 张民庆 黎 庶 刘俊成.横向内置加劲型中埋式橡胶止水带研制[J]. 现代隧道技术, 2019,56(6): 52-56
[9] 麻世垄 吴明颖 姚兆明.人工冻土蠕变试验及损伤经验模型分析[J]. 现代隧道技术, 2019,56(6): 57-62
[10] 马 莉 1 李 盛 2 王起才 2 于本田 2 刘亚朋 2 王庆石 2.高填黄土矩形、拱形明洞减载结构土压力差异性规律研究[J]. 现代隧道技术, 2019,56(6): 63-69
[11] 郭 健 1,2 杨治国 1,2 康逢学 3.基于向量投影响应面法的隧道围岩变形稳定可靠度分析[J]. 现代隧道技术, 2019,56(6): 70-77
[12] 刘明才.隧道超欠挖下锚喷支护系统的稳定性分析[J]. 现代隧道技术, 2019,56(6): 78-84
[13] 于建新 1 刘焕春 2 魏海霞 1 陈 晨 1.近邻隧道爆破施工相互动力影响研究[J]. 现代隧道技术, 2019,56(6): 85-92
[14] 谢立广 1 杨 群 2 盛 湧 1 唐富军 1.关于公路隧道健康状况均衡评估模型的探索[J]. 现代隧道技术, 2019,56(6): 93-98
[15] 孙浩轩 1 李培现 1 崔希民 1 姚德华 2 肖 武 3.巴岳山隧道受煤矿采动影响分析[J]. 现代隧道技术, 2019,56(6): 99-106
Copyright 2010 by 现代隧道技术