[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2011, Vol. 48 Issue (3) :59-63    DOI:
分析与计算 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
高寒隧道保温设计研究及热工计算方法初探
(四川省交通运输厅交通勘察设计研究院,成都  610017)
Discussion on Insulation Design for Tunnels in High-altitude
and Severe Cold Region and Thermal Calculation Method
(Survey & Design Research Institute of Sichuan Provincial Communication Department, Chengdu  610017 )
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要      目前国内高寒隧道研究成果还不能完全满足隧道设计要求,文章借鉴我国建设部房建行业和日本国铁的研究成果,提出了适用于季节性冻土隧道洞口保温段长度、衬砌保温及水沟保温的设计计算方法。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
张生
关键词高寒隧道        保温设计        计算方法     
Abstract: The domestic research achievements for tunnels in high-altitude and severe cold region is not so rich that can't meet the requirement of tunnel design. Taking the research findings of house building industry in China and National Railway in Japan for reference, the design calculation methods of portal insulation length, lining heat preservation and ditch heat preservation appropriate for tunnels in seasonal frozen ground are put forward.
Keywords Tunnels in high-altitude and severe cold region,   Heat preservation design,   Calculation method     
出版日期: 2011-03-29
作者简介: 张 生(1986-),男,助理工程师,从事隧道设计工作,E-mail:scdxzs@163.com.
引用本文:   
张生 .高寒隧道保温设计研究及热工计算方法初探[J]  现代隧道技术, 2011,V48(3): 59-63
ZHANG Sheng .Discussion on Insulation Design for Tunnels in High-altitude
and Severe Cold Region and Thermal Calculation Method[J]  MODERN TUNNELLING TECHNOLOGY, 2011,V48(3): 59-63
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2011/V48/I3/59
 
没有本文参考文献
[1] 汪家雷 纪新博.顶管顶力计算方法比较分析[J]. 现代隧道技术, 2018,55(6): 11-18
[2] 汪波1, 郭新新1, 何川1, 吴德兴2.当前我国高地应力隧道支护技术特点及发展趋势浅析[J]. 现代隧道技术, 2018,55(5): 1-10
[3] 于程硕1, 2, 丁文其1, 2, 张清照1, 2.既有城市隧道衬砌结构的损伤评价计算方法探究[J]. 现代隧道技术, 2018,55(5): 11-18
[4] 邱明明 1 杨果林 1 吴镇清 2 姜安龙 3 林宇亮.双孔平行地铁隧道盾构施工地表沉降分布规律研究[J]. 现代隧道技术, 2017,54(2): 96-105
[5] 李晓霖 1, 2 陶连金 1 郭 婷 2 惠丽萍.小间距平行盾构隧道的实用计算方法及其应用[J]. 现代隧道技术, 2016,53(5): 161-167
[6] 拓勇飞, 郭小红.南京纬三路过江通道总体设计与关键技术[J]. 现代隧道技术, 2015,52(4): 1-6
[7] 李昕1, 舒恒1, 张亚果2, 杨林松1, 李金1, 郭小红1.超高水压复合地层大直径盾构隧道纵断面优化设计研究[J]. 现代隧道技术, 2015,52(4): 7-14
[8] 姚占虎1, 杨钊2, 田毅1, 忽慧涛1.南京纬三路过江通道工程关键施工技术[J]. 现代隧道技术, 2015,52(4): 15-23
[9] 李新宇, 张顶立, 房倩, 宋浩然.越江跨海隧道突水模式研究[J]. 现代隧道技术, 2015,52(4): 24-31
[10] 舒恒, 吴树元, 李健, 郭小红.超大直径水下盾构隧道健康监测设计研究[J]. 现代隧道技术, 2015,52(4): 32-40
[11] 刘光凤1, 陈方伟2, 周直1, 张士龙3, 刘明强1.基于灰色模糊多属性群决策的越江隧道投资风险辨识[J]. 现代隧道技术, 2015,52(4): 41-48
[12] 姚占虎.南京纬三路过江通道工程盾构段施工风险评估[J]. 现代隧道技术, 2015,52(4): 49-54
[13] 张伯阳1, 赵小鹏1, 张亚果2, 陈郁1.泥水盾构饱和法带压开舱风险控制技术[J]. 现代隧道技术, 2015,52(4): 55-61
[14] 胡云华1 张建民2 郑少华1.砂土地层泥水盾构最大支护压力的实用计算方法探讨[J]. 现代隧道技术, 2015,52(4): 158-164
[15] 王春浩.超大断面黄土公路隧道围岩压力计算方法分析[J]. 现代隧道技术, 2015,52(3): 175-181
Copyright 2010 by 现代隧道技术