[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2011, Vol. 48 Issue (6) :82-87    DOI:
规划与设计 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
钱江通道及接线工程钱江隧道设计综述
(中铁第四勘察设计院集团有限公司,武汉  430063)
Design of the Qiantang River Tunnel of the Qianjiang Crossing and Connection Project
(China Railway the 4th Survey and Design Group Co., Ltd., Wuhan 430063)
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要  在建的钱江隧道是高速公路项目钱江通道及接线工程下穿钱塘江的控制性工程,隧址位于钱塘江入海口,工程地质条件及河段水文条件复杂。隧道过江段采用盾构法施工,隧道直径为15.0 m,是目前世界上最大的盾构法隧道。文章详细介绍了钱江隧道工程的建设环境、建设标准,以及隧道平面、纵断面及横断面布置等总体设计方案,并对超大直径盾构隧道结构及防水、盾构浅埋下穿河流、软土地层深基坑、盾构段立体化平行作业及综合防灾系统等关键技术进行了阐述。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
孙文昊
关键词钱江隧道        超大直径    总体设计     
Abstract: The Qiantang River Tunnel, which is currently under construction, stretches beneath the Qiantang River and occupies a dominant position in the Qianjiang Crossing and Connection Project, which is an important part of the highway project in Hangzhou. The tunnel is located at the mouth of the Qiantang River, and the geological and hydrological conditions are very complex. The section beneath the river was constructed using a shield with a diameter of 15.0m, which makes it the world's largest shield tunnel. This paper describes the overall design scheme of the Qiantang River tunnel, the construction environment, construction standards, the tunnel plane, the profile and cross-section arrangement, etc. Some key technologies are also elaborated upon, including the structure and waterproofing of the large-diameter shield tunnel, the shielding beneath the river with shallow overburden, the deep foundation pit in soft soil, the three-dimensional parallel operation of the shield section and the comprehensive hazard prevention system.
KeywordsQiantang River Tunnel,   Large-diameter shield tunnel,   Overall design     
出版日期: 2011-07-25
作者简介: 孙文昊(1975-),男,硕士,高级工程师,主要从事水底隧道设计与研究,E-mail: tsyswh@163.com
引用本文:   
孙文昊 .钱江通道及接线工程钱江隧道设计综述[J]  现代隧道技术, 2011,V48(6): 82-87
SUN Wen-Hao .Design of the Qiantang River Tunnel of the Qianjiang Crossing and Connection Project[J]  MODERN TUNNELLING TECHNOLOGY, 2011,V48(6): 82-87
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2011/V48/I6/82
 
没有本文参考文献
[1] 汪波1, 郭新新1, 何川1, 吴德兴2.当前我国高地应力隧道支护技术特点及发展趋势浅析[J]. 现代隧道技术, 2018,55(5): 1-10
[2] 吴金刚.妈湾通道前海湾海底隧道沉管法技术可行性研究[J]. 现代隧道技术, 2018,55(3): 28-36
[3] 拓勇飞, 郭小红.南京纬三路过江通道总体设计与关键技术[J]. 现代隧道技术, 2015,52(4): 1-6
[4] 李昕1, 舒恒1, 张亚果2, 杨林松1, 李金1, 郭小红1.超高水压复合地层大直径盾构隧道纵断面优化设计研究[J]. 现代隧道技术, 2015,52(4): 7-14
[5] 姚占虎1, 杨钊2, 田毅1, 忽慧涛1.南京纬三路过江通道工程关键施工技术[J]. 现代隧道技术, 2015,52(4): 15-23
[6] 李新宇, 张顶立, 房倩, 宋浩然.越江跨海隧道突水模式研究[J]. 现代隧道技术, 2015,52(4): 24-31
[7] 舒恒, 吴树元, 李健, 郭小红.超大直径水下盾构隧道健康监测设计研究[J]. 现代隧道技术, 2015,52(4): 32-40
[8] 刘光凤1, 陈方伟2, 周直1, 张士龙3, 刘明强1.基于灰色模糊多属性群决策的越江隧道投资风险辨识[J]. 现代隧道技术, 2015,52(4): 41-48
[9] 姚占虎.南京纬三路过江通道工程盾构段施工风险评估[J]. 现代隧道技术, 2015,52(4): 49-54
[10] 张伯阳1, 赵小鹏1, 张亚果2, 陈郁1.泥水盾构饱和法带压开舱风险控制技术[J]. 现代隧道技术, 2015,52(4): 55-61
[11] 李玉峰1,2, 彭立敏1, 雷明峰1,2.高速铁路交叉隧道动力学问题研究综述[J]. 现代隧道技术, 2015,52(2): 8-15
[12] 张瀚1,2, 李英明1,3, 任方涛2, 杨明东3.基于Zienkiewicz-Pande 准则的隧道/巷道围岩弹塑性分析[J]. 现代隧道技术, 2015,52(2): 30-35
[13] 周泽林, 陈寿根, 李岩松.深埋引水隧洞软弱围岩支护结构受力特征研究[J]. 现代隧道技术, 2015,52(2): 36-43
[14] 金大龙, 李兴高.砂土地层盾构隧道开挖面支护压力与地表变形关系模型试验研究[J]. 现代隧道技术, 2015,52(2): 44-51
[15] 王亚琼1,2, 周绍文1, 孙铁军3, 谢永利1.基于非对称贴近度的在役隧道衬砌结构健康诊断方法[J]. 现代隧道技术, 2015,52(2): 52-58
Copyright 2010 by 现代隧道技术