[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2012, Vol. 49 Issue (3) :77-82    DOI:
分析与计算 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
高速铁路隧道台阶法施工技术参数分析与应用
贵广铁路有限公司
Parameters Analysis and Application of Bench Method for High-speed Railway Tunnels
Guiyang-Guangzhou Railway Co., Ltd
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要     隧道台阶法施工因其适应性较强而受业界青睐,但高速铁路大断面隧道台阶法施工技术要素的合理选取有待深入分析论证。文章试图通过建立三维数值计算模型,综合分析多种围岩条件下不同台阶要素对洞室稳定性的影响,以期为台阶长度、高度及上断面扁平度等重要参数的选取提供理论支撑;并通过西南艰险山区高速铁路隧道工程实践证实了其科学可靠性。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
关键词铁路隧道        台阶法        参数        数值模型        围岩变形     
Abstract: The bench method in tunnel construction is favored due to its good adaptability. It is necessary to take a further study on the reasonable selection of technical factors involved in bench method for large-section tunnel of high-speed railway. A three-dimensional numerical calculation model is established to analyzes the influence of factors on excavation stability and provide the theoretical support to the selections of bench length, bench height and flatness of upper section.
Keywordsfont-size: 10.5pt,   mso-bidi-font-size: 11.0pt,   mso-bidi-font-family: 'Times New Roman',   mso-font-kerning: 1.0pt,   mso-ansi-language: EN-US,   mso-fareast-language: ZH-CN,   mso-bidi-language: AR-SA,   Railway tunnel, Bench method, Parameters, Numerical model, Deformation of surrounding rock')" href="#">mso-fareast-font-family: 宋体" lang="EN-US">Railway tunnel, Bench method, Parameters, Numerical model, Deformation of surrounding rock     
作者简介: 作者简介: 黄嘉亿(1963-),男,副总经理兼总工程师,高级工程师,主要从事铁路工程建设技术管理工作,E-mail:hjy365@126.com
引用本文:   
.高速铁路隧道台阶法施工技术参数分析与应用[J]  现代隧道技术, 2012,V49(3): 77-82
.Parameters Analysis and Application of Bench Method for High-speed Railway Tunnels[J]  MODERN TUNNELLING TECHNOLOGY, 2012,V49(3): 77-82
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2012/V49/I3/77
 
没有本文参考文献
[1] 于 洋 洪 鹏 朱 陈 赵秀绍.深埋硬岩隧洞围岩变形量分形结构研究[J]. 现代隧道技术, 2019,56(1): 124-129
[2] 汪波1, 郭新新1, 何川1, 吴德兴2.当前我国高地应力隧道支护技术特点及发展趋势浅析[J]. 现代隧道技术, 2018,55(5): 1-10
[3] 杨 峰.隧道二次衬砌合理施作时机确定方法研究[J]. 现代隧道技术, 2018,55(2): 56-64
[4] 刘新荣 1,2 王吉明 1,2 李栋梁 1,2 郭子红 1,2.交错近接新建隧道围岩变形三维模型试验研究[J]. 现代隧道技术, 2017,54(5): 171-179
[5] 屈家旺 1 刘泉声 2 马 昊 2.泥质软岩隧道穿越富水断层带初期支护变形侵限机理及处治对策[J]. 现代隧道技术, 2017,54(3): 181-189
[6] 王新胜 1 左伟芹 2 周成涛 1 陈 玉 1 侯亚彬 1.基于非齐次指数函数灰色模型的隧道围岩变形预测[J]. 现代隧道技术, 2017,54(1): 105-109
[7] 温 森1,2 刘予会2 杨圣奇1 贺子奇2.基于Hoek-Brown准则的圆形洞室围岩流变变形研究[J]. 现代隧道技术, 2016,53(3): 63-67
[8] 王义国1 吉安俊2.隧道围岩变形预测Verhulst模型的精度与影响因素分析[J]. 现代隧道技术, 2015,52(5): 74-78
[9] 拓勇飞, 郭小红.南京纬三路过江通道总体设计与关键技术[J]. 现代隧道技术, 2015,52(4): 1-6
[10] 李昕1, 舒恒1, 张亚果2, 杨林松1, 李金1, 郭小红1.超高水压复合地层大直径盾构隧道纵断面优化设计研究[J]. 现代隧道技术, 2015,52(4): 7-14
[11] 姚占虎1, 杨钊2, 田毅1, 忽慧涛1.南京纬三路过江通道工程关键施工技术[J]. 现代隧道技术, 2015,52(4): 15-23
[12] 李新宇, 张顶立, 房倩, 宋浩然.越江跨海隧道突水模式研究[J]. 现代隧道技术, 2015,52(4): 24-31
[13] 舒恒, 吴树元, 李健, 郭小红.超大直径水下盾构隧道健康监测设计研究[J]. 现代隧道技术, 2015,52(4): 32-40
[14] 刘光凤1, 陈方伟2, 周直1, 张士龙3, 刘明强1.基于灰色模糊多属性群决策的越江隧道投资风险辨识[J]. 现代隧道技术, 2015,52(4): 41-48
[15] 姚占虎.南京纬三路过江通道工程盾构段施工风险评估[J]. 现代隧道技术, 2015,52(4): 49-54
Copyright 2010 by 现代隧道技术