[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2024, Vol. 61 Issue (4) :151-160    DOI:
数值分析与计算 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
内部结构施作方式对盾构隧道纵向力学特性的影响研究
(1. 西南交通大学 交通隧道工程教育部重点实验室,成都 610031;2. 中铁第四勘察设计院集团有限公司,武汉 430063)
Study on the Influence of Construction Methods of Internal Structures on Longitudinal Mechanical Characteristics of Shield Tunnels
(1. Key Laboratory of Transportation Tunnel Engineering, Ministry of Education, Southwest Jiaotong University, Chengdu 610031;2. China Railway Siyuan Survey and Design Group Co., Ltd., Wuhan 430063)
Download: PDF (6432KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要 为研究装配+现浇式内部结构和全现浇式内部结构的盾构隧道在超载下的纵向力学性能,以济南济泺路穿黄隧道及武汉三阳路隧道为工程背景,采用ABAQUS有限元软件建立围岩-管片-内部结构三维数值模型,并通过相似模型试验验证数值模型的合理性,对比分析不同内部结构施作方式下管片和内部结构的变形及力学特征,针对内部结构的损伤分布情况提出相应构件间连接的优化思路。研究结果表明:装配+现浇式内部结构分担的内力小于全现浇式结构分担的内力,管片承担的弯矩和剪力更大,导致管片的张开量和错台量均大于全现浇式,其中张开量的差异较为明显,较全现浇式的高10.02%~21.64%。此外,装配+现浇式内部结构由于应力集中影响更易出现局部损伤。当内部结构出现大面积损伤时,其加载区域承担的正弯矩下降,两端未破坏区域承担的负弯矩增大,结构的抗弯刚度降低,导致管片的弯矩值和环间张开量增大。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
刘肖汇1 封 坤1 郭文琦1 鲁选一1 彭长胜2 李姣阳2
关键词盾构隧道   内部结构   纵向力学性能   数值模拟   地表超载     
Abstract: To study the longitudinal mechanical properties of shield tunnels with prefabricated assembly + cast-inplace internal structures and fully cast-in-place internal structures under overloading conditions, the Jinan Jiluo Road Yellow River Crossing Tunnel and Wuhan Sanyang Road Tunnel were taken as engineering backgrounds. A three-dimensional numerical model of the surrounding rock-segment-internal structure was established using ABAQUS finite element software, and the rationalityof the numerical model was verified through similar model tests.Comparative analysis of the deformation and mechanical characteristics of the segments and internal structures under different construction methods was conducted. Based on the damage distribution of the internal structures, optimization ideas for connections between components were proposed. The results show that the internal forces borne by the prefabricated assembly+ cast-in-place internal structure are smaller than those of the fully cast-in-place structure. The bending moment and shear force borne by the segments are greater, resulting in larger openings and dislocations compared to the fully cast-in-place structure, with the difference in openings being particularly significant, 10.02%~21.64% higher than the fully cast-in-place structure. Furthermore, the prefabricated assembly +cast-in-place internal structure is more prone to local damage due to stress concentration. When the internal structure experiences large-scale damage, the positive bending moment borne by the loading area decreases, while the negative bending moment borne by the undamaged area at both ends increases, reducing the bending stiffness of the structure and increasing the bending moments and inter-ring openings of the segments.
KeywordsShield tunnel,   Internal structure,   Longitudinal mechanical properties,   Numerical simulation,   Ground surface overload     
基金资助:国家重点研发计划项目(2021YFB2600900);国家自然科学基金项目(51878569,52078430).
作者简介: 刘肖汇(2000-),男,硕士研究生,从事隧道及地下工程设计理论研究工作,E-mail:liuxiaohui0918@foxmail.com. 通讯作者:封 坤(1983-),男,博士,教授,主要从事隧道与地下工程方面的研究和教学工作,E-mail: windfeng813@163.com.
引用本文:   
刘肖汇1 封 坤1 郭文琦1 鲁选一1 彭长胜2 李姣阳2 .内部结构施作方式对盾构隧道纵向力学特性的影响研究[J]  现代隧道技术, 2024,V61(4): 151-160
LIU Xiaohui1 FENG Kun1 GUO Wenqi1 LU Xuanyi1 PENG Changsheng2 LI Jiaoyang2 .Study on the Influence of Construction Methods of Internal Structures on Longitudinal Mechanical Characteristics of Shield Tunnels[J]  MODERN TUNNELLING TECHNOLOGY, 2024,V61(4): 151-160
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2024/V61/I4/151
 
没有本文参考文献
[1] 刘 博1,2 郑金雷1,3,4 张 昭1 麻建飞4.新建隧道上跨施工引起既有盾构隧道纵向变形力学模型研究[J]. 现代隧道技术, 2024,61(4): 112-118
[2] 朱美恒1 陈思睿2 黄忠凯2 李永波1 张吾渝3 张冬梅2.地表超载作用下大直径全预制装配盾构隧道受力变形规律研究[J]. 现代隧道技术, 2024,61(4): 161-171
[3] 王志远1 杨 昊2 林 刚1 连正洲2 喻 波1.连接螺栓对盾构隧道振动响应的影响分析[J]. 现代隧道技术, 2024,61(4): 172-179
[4] 苏培东 陆星好 李有贵 邱 鹏 安兴玲.亭子口灌区瓦斯水工隧洞施工通风影响因素研究[J]. 现代隧道技术, 2024,61(4): 180-191
[5] 蔡光远1 唐泽人2 陈 辰3 朱元昌2 于朋臣3 柳 献2.大长细比预制中隔墙智能拼装设备研发[J]. 现代隧道技术, 2024,61(4): 275-282
[6] 黄 戡 吴奇江 邓 喜 李 徽.基于滑移面夹角线性变化的盾构隧道松动土压力计算方法研究[J]. 现代隧道技术, 2024,61(3): 8-17
[7] 陈立保1 封 坤2 孙文昊1 邢文杰2 潘 瑾2 耿珺洋2 王俊玲3.高水压作用下衬砌管片构件氯离子侵蚀数值模拟研究[J]. 现代隧道技术, 2024,61(3): 131-140
[8] 赵海松 魏安辉 邵 江 向 波 邬 凯 李世琦 周仁强 柳 松.浅埋顺层偏压洞口边坡失稳机制及防治研究[J]. 现代隧道技术, 2024,61(3): 253-265
[9] 葛照国.大直径盾构隧道近接高架桩基群施工影响分区方法与分区控制技术研究[J]. 现代隧道技术, 2024,61(3): 276-289
[10] 竺维彬1,2,3 米晋生2,3 王 晖2,3,4 钟长平1,2,3.复合地层盾构隧道修建技术创新与展望[J]. 现代隧道技术, 2024,61(2): 90-104
[11] 陈 健1,2,3,4 袁大军5 苏秀婷1,2 王志奎1,2,3.超大直径水下盾构隧道施工技术进展与展望[J]. 现代隧道技术, 2024,61(2): 124-138
[12] 包小华1,2,3 袁槐岑1,2,3 陈湘生1,2,3 沈 俊1,2,3 郭建波4 沈 翔1,2,3 崔宏志1,2,3.水下盾构隧道建造与运维技术研究现状与展望[J]. 现代隧道技术, 2024,61(1): 16-35
[13] 屈建荣1 敬雅文2 任兆丹1 熊 颖2 陈雪锋1 冯冀蒙2.基于围岩破坏特征的单洞四车道公路隧道围岩分级修正研究[J]. 现代隧道技术, 2024,61(1): 48-55
[14] 张 庆1 甄文战1 封 坤2.大直径盾构隧道下穿既有高速公路桥涵影响分析[J]. 现代隧道技术, 2024,61(1): 137-145
[15] 郝鹏飞.预制整体式弧形件施工质量控制指标研究[J]. 现代隧道技术, 2024,61(1): 245-251
Copyright 2010 by 现代隧道技术