[an error occurred while processing this directive]
 
       首 页  |  期刊介绍  |  编委会  |  投稿指南  |  期刊订阅  |  广告合作  |  留言板  |  联系我们 |  English
现代隧道技术 2014, Vol. 51 Issue (6) :173-178    DOI:
施工设备与材料 最新目录 | 下期目录 | 过刊浏览 | 高级检索 << [an error occurred while processing this directive] | [an error occurred while processing this directive] >>
行星刀盘方顶管全断面切削混凝土试验研究
(上海隧道工程股份有限公司,上海 200082)
Experimental Study on Full-Face Concrete Cutting by a Rectangular Pipe-jacking Machine with a Planetary Cutterhead
(Shanghai Tunnel Engineering Co. Ltd., Shanghai 200082)
Download: PDF (0KB)   HTML (1KB)   Export: BibTeX or EndNote (RIS)      Supporting Info
摘要  目前盾构隧道联络通道主要采用土体加固暗挖法进行施工,但在复杂工况环境下仍存在极大施工风险。文章通过采用专门研制的行星刀盘方顶管对不同强度等级的混凝土试块进行全断面切削试验,对顶管刀具选型及布置、行星刀盘顶管切削性能等进行了研究,可为今后采用顶管法直接切削混凝土复合管片的盾构隧道联络通道的施工提供相应的技术储备,避免移除管片暴露加固土体,以大大降低盾构隧道联络通道施工风险。
Service
把本文推荐给朋友
加入我的书架
加入引用管理器
Email Alert
RSS
作者相关文章
魏林春
关键词:   
Abstract: The mining method with soil reinforcement is now mainly adopted in the construction of cross passages of shield tunnels, which is characterized by high risk and complex working conditions. In this paper, based on the adoption of a specially developed rectangular pipe-jacking machine with a planetary cutterhead, full-face cutting tests are carried out on concrete samples of different strength grades. Research on cutting-tool selection and layout, as well as the machinability of pipe-jacking with a planetary cutterhead, are undertaken, providing a technical reference for future cross-passage construction in shield tunnels adopting pipe-jacking to cut concrete composite segments, thereby refraining from exposing the reinforced soil mass due to segment removal, and greatly reducing the construction risk.
Keywords Planetary cutterhead,   Pipe-jacking,   Cutting test,   Optimization of cutting tools,   Cross passage     
出版日期: 2014-01-19
基金资助:基金项目:上海市科委科技攻关计划资助项目(11231202500).
作者简介: 作者简介:魏林春(1981-),男,工学硕士,工程师,主要从事隧道及地下工程等领域的施工及新技术研发工作,E-mail:weilch@hotmail.com.
引用本文:   
魏林春 .行星刀盘方顶管全断面切削混凝土试验研究[J]  现代隧道技术, 2014,V51(6): 173-178
WEI Lin-Chun .Experimental Study on Full-Face Concrete Cutting by a Rectangular Pipe-jacking Machine with a Planetary Cutterhead [J]  MODERN TUNNELLING TECHNOLOGY, 2014,V51(6): 173-178
链接本文:  
http://www.xdsdjs.com/CN/      或     http://www.xdsdjs.com/CN/Y2014/V51/I6/173
 
没有本文参考文献
[1] 刘飞香 1,2.SCDZ133智能型隧道多功能作业台车及其施工技术[J]. 现代隧道技术, 2019,56(4): 1-7
[2] 周文波 吴惠明 赵 峻.泥岩地层常压刀盘盾构的掘进策略与分析[J]. 现代隧道技术, 2019,56(4): 8-15
[3] 陈卓立 1,2 朱训国 1,2 赵德深 1,2 王云平 1,2.深埋隧洞让压支护结构的锚固机理探究[J]. 现代隧道技术, 2019,56(4): 16-22
[4] 王全胜.矩形盾构法隧道管片分块案例分析及分块原则[J]. 现代隧道技术, 2019,56(4): 23-29
[5] 张 恒 1 朱亦墨 1 林 放 1 陈寿根 1 杨家松 2.基于Q系统的地下洞库中台阶最佳开挖高度研究[J]. 现代隧道技术, 2019,56(4): 30-37
[6] 李 好.大断面岩溶隧道贯通段地质情况的无线电波透视试验探测[J]. 现代隧道技术, 2019,56(4): 38-42
[7] 岑培山 1 田坤云 2 王喜民 3.蒙华铁路阳山隧道瓦斯危害性评估研究[J]. 现代隧道技术, 2019,56(4): 43-49
[8] 朱建峰 1 宫全美 2.软土地层盾构隧道长期沉降离心试验研究[J]. 现代隧道技术, 2019,56(4): 49-55
[9] 陈柚州 1 任 涛 2 邓 朋 2 王 斌 3.基于人工蜂群优化小波神经网络的隧道沉降预测[J]. 现代隧道技术, 2019,56(4): 56-61
[10] 王登茂 滕振楠 田志宇 陈志学.桃园至巴中高速公路八庙隧道非常规岩爆段病害处治与设计反思[J]. 现代隧道技术, 2019,56(4): 62-68
[11] 吴树元 1 程 勇 1 谢全敏 2 刘继国 1 陈必光 1.西藏米拉山隧道围岩大变形成因分析[J]. 现代隧道技术, 2019,56(4): 69-73
[12] 王 睢 1,2,3 钟祖良 3 刘新荣 3 吴 波 1,2,4 赵勇博 1,2 李占涛 1,2.基于D-P准则有压圆形衬砌隧洞弹塑性解[J]. 现代隧道技术, 2019,56(4): 74-80
[13] 李 明 严松宏 潘春阳 张旭斌.富水大断面黄土隧道开挖流固耦合效应分析[J]. 现代隧道技术, 2019,56(4): 81-88
[14] 张 凯 1 陈寿根 2 霍晓龙 3 谭信荣 4.岩溶地区隧道涌水风险的可拓评价模型及应用[J]. 现代隧道技术, 2019,56(4): 89-96
[15] 李 杰 1 张 斌 1 付 柯 1 马 超 1 郭京波 1 牛得草 2.基于现场掘进数据的复合地层盾构掘进性能预测方法研究[J]. 现代隧道技术, 2019,56(4): 97-104
Copyright 2010 by 现代隧道技术